Washing windows with a pressure washer by the Best and Most Thorough Residential House Cleaning and Maid Service in Evanston, IL. Dial-A-Maid. A pressure washer washes windows fast and allows you to reach 2nd story windows without having to climb all the way to the roof. Requirements for window pressure washing are threefold.
- Low pressure under 2000 psi
- Wide spray pattern, 40-65 degree range.
- Ability to mix cleaning solution and water in the spray reservoir.
An electric power washer with a detergent reservoir for windows works better than a higher pressure gas pressure washing machine. With a gas, high pressure machine, there is always a possibility of cracking the window or removing the seals and putty of the window, says the Most Thorough Residential House Cleaning and Maid Service in Evanston, IL., Dial-A-Maid.
Below are some pointers for using your pressure washer to wash your windows effectively and safely.
- Set up the power washer by connecting it to a source of water. Before turning it on, set the nozzle to it’s widest pattern, a 40-65 degree nozzle, works best.
- Adjust the pressure to 1500-2000 psi and test the spray on a basement or garage window. Spray the window at an angle, not perpendicular.
- Fill the soap reservoir with a detergent recommended by the pressure washer manufacturer. The detergent should be safe for your window frame material dispenser. If your pressure washer does not have a soap reservoir, you will need to wash them first with a window cleaning solution and sponge applicator, and then rinse with the power washer.
- Keep the tip of the sprayer a safe distance from the windows. Spray from the edge of the pane toward the center and avoid getting spray under the window putty or it might come off. Use a 30 degree angle, when aiming the pressure washer wand at the window.
With these window pressure washing pointers, you will have clean and sparkling windows in a minimum amount of time, says the Best Residential House Cleaning and Maid Service in Evanston, IL., Dial-A-Maid.